> From the Common palette, drop a Move block onto a sequence beam.  Drop a 

> second Move block below it but not on the sequence beam.  Starting at the 

> second block depress the shift key and right mouse button and a wire spool 

> image will appear.  By dragging your mouse, connect the spool to the upper 

> sequence beam immediately before the Move block you inserted.  Set one 

> Move block to B and the other to C and likewise one Move block to Forward 

> and the other to Reverse.

>

> This is an example of parallel processing.  Also, you can use Motor blocks 

> from the Complete palette to accomplish the same objective but with added 

> functionality like ramping up/down the motor speed.

>

> Charlie Aldridge

>

> ----- Original Message ----- 

> From: "Robert Haskins" <[log in to unmask]>

> To: <[log in to unmask]>

> Sent: Tuesday, November 03, 2009 5:14 PM

> Subject: [VADCFLL-L] Programming problem

>

>

>> While on the subject of programming. My team, and subsequently I, have

>> not been able to figure out how to set the power and direction on two

>> motors independently. I know how to do this with the RCX software, but

>> I cannot figure this out using the NXT.

>>

>> Any pointers?

>>

>> -- 

>> Haskins Family Farm

>> Middletown, VA

>> http://www.localharvest.org/farms/M20435

>>

>> -- To UNSUBSCRIBE or CHANGE your settings, please visit 

>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or 

>> leave the list".

>>

>> -- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. 

>> Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to 

>> subscribe.

> 



-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".



-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.