There is a reset button on the NXTBrick.
If you hold the brick so you can read it - facing you - then turn it
around - there are six holes across the top (and bottom). In the top
left hole is a hard reset. Get a paperclip or long screw driver and
hard set the brick. Then connect it to a computer and reload the
firmware. (Make sure you have new batteries while you do this).
Professor Drake
Battlefield High School
Information Technology and Programming Faculty
ILITE Robotics Coach, FRC Team 1885, FTC, ZERO Robotics, Seaperch
US FIRST FLL Judge, Tournament Director
(571) 261-4726
[log in to unmask]
FIRST1885.org
ILITERobotics.org
From: "Salas, Alex" <[log in to unmask]>
To: <[log in to unmask]>
Date: 10/10/2012 7:27 PM
Subject: Re: [VADCFLL-L] brick won't turn on
Check if it is not on SAMBA MODE.
When turned on, nothing goes on, but you can hear a faint tic sound. If
so, you need to plug it to the Nxt console and update the firmware.
Currently I think it is 1.3.
Sent from my iPhone
On Oct 10, 2012, at 7:23 PM, "Swayne, Dominic - swaynedd"
<[log in to unmask]<mailto:[log in to unmask]>> wrote:
True - all you need to do is call Lego Education - go to their website
for their tech support number.
Sent from my iPad
On Oct 10, 2012, at 7:22 PM, "Emler, Paul"
<[log in to unmask]<mailto:[log in to unmask]>>
wrote:
I have one that turns on but screen is blank. I heard you can send them
disagree to get replaced. Is that true and where do they get sent?
Sent from my HTC Inspire™ 4G on AT&T
----- Reply message -----
From: "Cathy Moessner"
<[log in to unmask]<mailto:[log in to unmask]>>
To:
"[log in to unmask]<mailto:[log in to unmask]>"
<[log in to unmask]<mailto:[log in to unmask]>>
Subject: [VADCFLL-L] brick won't turn on
Date: Wed, Oct 10, 2012 7:06 pm
Help!
Our NXT brick won't turn on! We tried pressing the reset button under
the USB port, but it still won't turn on.
Any suggestions?
Thanks,
Cathy Moessner
Robotic Panthers
Powell Elementary School
________________________________
From: Nagraj Varada <[log in to unmask]<mailto:[log in to unmask]>>
To:
[log in to unmask]<mailto:[log in to unmask]>
Sent: Wednesday, October 10, 2012 8:46 AM
Subject: Re: [VADCFLL-L] Transitions mission
Can the robot climb the center platform using ramp or steps?
Thanks,
Nag
________________________________
From: will chen
<[log in to unmask]<mailto:[log in to unmask]>>;
To:
<[log in to unmask]<mailto:[log in to unmask]>>;
Subject: Re: [VADCFLL-L] Transitions mission
Sent: Wed, Oct 10, 2012 12:31:00 AM
I believe the robot can only be touching the center platform to get
points
it says,"
— Robot touching tilted center platform only: 45
— OR —
— Robot touching balanced center platform only: 65
For either case:
The center platform must not be touching anything but the mat and the
robot.
The center platform must remain between the stairs and the ramp."
[log in to unmask] ~
On Tue, Oct 9, 2012 at 7:47 PM, Savita Sethi <[log in to unmask]>
wrote:
Hello all,
My team has a question on the transitions mission. The rule says " the
robot gets onto the center platform". Does this mean the robot has to be
completely off the ramp and/or stairs and only on the center platform to
get the 65 points or as long as some part of robot is on the center
platform, they get the points.
And what if robot is carrying an attachment, does that also have to be
completely on the center platform? We also have seen at times that the
robot does get to the platform but either its back wheel or another
small part is in the gap between the platform and the ramp, so how will
this be judged?
Thanks
Savita
#6623
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
******** Confidentiality Statement: This electronic message and
attachments are intended only for the use of the addressee and may
contain confidential or privileged information. Receipt of this
transmission by any person other than the intended recipient does not
constitute permission to examine, copy, or distribute the accompanying
material. If you received this electronic message in error, please
notify the sender of the message. ********
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
leave the list".
VADCFLL administrative announcements are sent via
VADCFLL-ANNOUNCEMENTS-L. Visit
https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
subscribe.
-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
|
