Thanks everyone! We may consider this, even though it could take more time. It just seems that if it is brought back to base, the robot/attachments could manipulate it from a better position and move it right to target - without all the angle moves.
The rules state that it must have contact with the mat, and inside the target area. It is still hard to determine if the target area is the ‘black’ area OR if it is the “black area” and putting the addition directly into the flow where the opening is. Any final thoughts on that?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jennifer Scott, NCTM
Nationally Certified Teacher of Music
Jennifer Scott's Piano Studio
Website: www.jspianostudio.com
> On Oct 30, 2017, at 2:06 PM, Chandra Shekhar Bhimaraju <[log in to unmask]> wrote:
>
> I agree that there is nothing that states you can bring back pump addition, however, I am not sure how you can get the FLOW mission back as this is secured, I would recommend checking you mission building instructions for FLOW..
>
> Regards
> Chandra Bhimaraju
> RoboRockers Coach.
>
>> On Mon, Oct 30, 2017 at 1:51 PM, Sandy <[log in to unmask]> wrote:
>> I am with David. I see nothing in the rules that indicates that the pump addition can’t be brought back to base.
>>
>> Sent from my iPhone
>>
>> > On Oct 30, 2017, at 1:45 PM, David Y <[log in to unmask]> wrote:
>> >
>> > Hello Jenny,
>> > I believe the pump addition (M03) has to start at the designated area, but I don't see why you can't bring it back to base and put it back if you choose to. There's no rule that says you can't. Of course that would take more time to bring it back to base and set it to target area.
>> >
>> > Best,
>> > David
>> >
>> > -----Original Message-----
>> > From: First Lego League in Virginia and DC [mailto:[log in to unmask]] On Behalf Of Jennifer Scott
>> > Sent: Monday, October 30, 2017 12:55 PM
>> > To: [log in to unmask]
>> > Subject: [VADCFLL-L] Flow Addition
>> >
>> > Hi there!
>> >
>> > Our team is trying to figure out alternatives to tackling the flow addition. Does it have to start out in the designated area next to the flow at the beginning (L shaped area)? Or, can the team bring it to base with the robot, and then move it to its target area, in contact with the flow?
>> >
>> > Thanks, would love your thoughts and advice.
>> > Jenny Scott
>> > Co-Coach Fox BLOCSS
>> >
>> > -- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
>> >
>> > -- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
>> >
>> > -- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
>> >
>> > -- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
>>
>> -- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
>>
>> -- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
>
> To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to subscribe.
-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
|
