VADCFLL-L Archives

October 2018

VADCFLL-L@LISTSERV.JMU.EDU

Options: Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Matthew Denyszyn <[log in to unmask]>
Reply To:
Matthew Denyszyn <[log in to unmask]>
Date:
Fri, 19 Oct 2018 09:07:17 -0400
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (2188 bytes) , text/html (3343 bytes)
Another issue can be movement of the robot while sensor is calibrating on
boot.  When the EV3 brick is red on boot it is calibrating itself and the
connected sensors.  Movement of the robot at this point can and will mess
with that calibration.  I recommend putting the robot on a flat surface and
not touching it while it boots.  Once the EV3 brick turns green you should
be able to move it with out effecting the calibration.  Additionally Large
movements when holding the robot when powered on can throw off the sensor.



V/R
Matt

On Fri, Oct 19, 2018 at 8:55 AM Cedric D'Costa <[log in to unmask]>
wrote:

> Hi Laskshmi,
>
> My team has managed this by simply removing the cable from the port and
> plugging it back in.
> If it happens too frequently, then call LEGO Education for a replacement.
>
> Regards,
> Cedric D’Costa
>
> Sent from my iPhone
>
> > On Oct 18, 2018, at 10:47 PM, Lakshmi Purushothaman <
> [log in to unmask]> wrote:
> >
> > Hi All
> >
> > The gyro sensor often starts increasing numbers and decreasing numbers
> even when the robot is not moving. We do have reset gyro but sometimes it
> acts crazy and then after reseting and shutting the brick down then it
> calms down. Is there a better way to manage the gyro ?
> >
> > Thanks
> > Lakshmi
> >
> > -- To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
> >
> > -- VADCFLL administrative announcements are sent via
> VADCFLL-ANNOUNCEMENTS-L. Visit
> https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to
> subscribe.
>
> -- To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
>
> -- VADCFLL administrative announcements are sent via
> VADCFLL-ANNOUNCEMENTS-L. Visit
> https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to
> subscribe.
>

-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.


ATOM RSS1 RSS2