VADCFLL-L Archives

First Lego League in Virginia and DC

VADCFLL-L@LISTSERV.JMU.EDU

Options: Use Forum View

Use Monospaced Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Sonya Shaver <[log in to unmask]>
Reply To:
Sonya Shaver <[log in to unmask]>
Date:
Sun, 30 Oct 2011 12:35:29 -0400
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (4 kB) , text/html (8 kB)
Thanks, Andy!  So is there something you have to buy to plug into your
computer?  Or into the robot?  What if your computer is already Bluetooth
enabled?  Or if it's not, could you use some other device like a smartphone
as the go between?

Sonya

On Thu, Oct 27, 2011 at 9:18 PM, Andy Traiger <[log in to unmask]>wrote:

> ** ** **
>
>  On another thread some coaches were mentioning having trouble with
> Bluetooth problems.  We have loads of trouble with our Bluetooth
> connection.  However, the time saved in developing our software missions
> when the Bluetooth connection is working makes it well worth the time it
> takes to get the connection started.****
>
> Here is a procedure for connecting to the NXT with Bluetooth that we have
> found very useful.  I copied this from the NXT Step Blog found here:****
>
>
> http://thenxtstep.blogspot.com/2006/10/nxt-and-bluetooth-problems-revisited.html
> ****
>
> ** **
>
> I don’t have the Bluethooth USB adapter that LEGO sells.  Instead, I
> bought the cheapest one I could find (about $10).  The Bluetooth connection
> to the NXT is very finicky on our computer, but if this procedure is
> followed we can establish a connection most of the time.  I’ve heard that
> the LEGO adapter will cause less trouble than a generic adapter like I
> have.  I don’t really know if this is true since I don’t have one to
> experiment with.****
>
> ** **
>
> Here’s the procedure that I copied from thenxtstep:****
>
> ** **
>
> Switch on the PC
>
> 2. Slide in the Bluetooth dongle (my PC doesn't boot with the dongle
> installed)
>
> 3. On the PC, open the Bluetooth Devices window
>
> 4. If any NXT device is listed in the Devices list, Remove it (otherwise,
> a 'Line Busy' error will pop up later). Make sure 'Turn discovery on' is
> selected. Close the Bluetooth Devices window.
>
> 5. Switch on the NXT, and select 'Search' from the bluetooth menu, then
> 'Connect' to the found computer. Accept the passcode [1234].
>
> 6. On the PC, a window comes up mentioning that a Bluetooth device is
> requesting to connect, asking if you want to allow connection. Click on the
> message to allow connection. A new window pops up, asking for the passcode.
> Type in the passcode and click Next. Again, the NXT beeps to verify the
> passcode; press the orange button on NXT to accept.
>
> 7. Open the Bluetooth Devices window. Select the NXT device and press
> 'Properties'. In the new window that opens, click the 'Services' tab. Now,
> Windows starts searching for services that NXT supports. Select all
> available services (in my case, two serial ports) and press OK. Windows now
> installs some new drivers. After that, close the Bluetooth Devices window.
>
> 8. Now, start the Mindstorms software on the PC, and open the NXT window.
> Scan for NXT devices, and after finding NXT, click "Connect" (if not
> already connected during scanning).
>
> 9. YES! It works! (for me anyway).****
>
> ** **
>
> Some comments:****
>
>  Steps 1 and 2 are not necessary for my Bluetooth adapter / Version of
> Windows 7.  But I’ve found steps 4-6 are critical to establishing / fixing
> a connection that used to be working but isn’t working any longer.  I have
> also found step 7 is not necessary to get my Bluetooth adapter talking.
> Sometimes, even this procedure fails for me.  I’ve found that shutting off
> Bluetooth on the NXT brick (something everyone should do before they bring
> their robots to the tournament!) and then turning it back on again fixes
> the problem and then I go through the procedure above to get things going
> again.  Sometimes when the LEGO robot shuts off automatically, you can just
> turn it back on and get it talking again.  Other times, it is necessary to
> go through steps 4-8 (skipping 7).****
>
> ** **
>
> I hope this helps those of you teams that are struggling with Bluetooth
> issues.****
>
> ** **
>
> **Andy Traiger******
>
> ****Vienna**** Robotics****
>
>  ------------------------------
> To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L.
> Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
> subscribe.
> ------------------------------
> To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L.
> Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
> subscribe.

-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.


ATOM RSS1 RSS2