Mike,

The best answer, in my personal opinion, should come from each individual
tournament. For a little background on this requirement change, the change
in the table wall border height was initiated by the availability of 2x4
wood (which is actually 3-1/2" tall when stood on end) in other countries.
Since standard wood sizes vary by country, a stock 2x4 is hard to obtain
for our international FLL teams.

My prediction is that the table height will most likely be 3-1/2" in all
tournaments being held in the United States and might vary in other
countries. It is good to verify prior to each tournament *if* your design
requires exactly 3-1/2". The better approach is to design your robot so
that variations of the table height does not influence the robot's
performance.

Best of Luck!
Bill

On Fri, Oct 26, 2012 at 7:26 PM, Michael Brown <[log in to unmask]> wrote:

> From robot game updates
>
> 16 - BORDER HEIGHT REMINDER
> Remember that the height of the table border walls at a tournament might
> be different than the height of the border walls of the tables you're been
> practicing on.  The Field Setup page (and Update 8, below) give allowable
> border heights of anywhere between 2-1/2" and 3-1/2" (64mm and 90mm).  If
> you rely on the upper third of the boder wall either being there or not
> being there, this variability may affect you.
>
> Are the vadcfll table borders at the 3-1/2" height?
>
> Our robot depends on that upper third being there as currently designed.
>
> Mike
> ------------------------------
> To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L.
> Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
> subscribe.

-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.