Also, even if they fell over and did touch the mat, the following applies for the FLL Rules;
Pre-Match Preparation
When you walk up to a field to compete on time, you’re allowed at least one minute to prepare and arrange your inactive robot and any objects it will be moving or using.
You must use the mission models supplied by the tournament and may not bring duplicates to the competition area.
You may NOT:
take mission models apart.
lock or attach mission models to the robot.
lock or attach mission models to each other.
lock or attach anything to mission models.
touch mission models out of Base for any strategic purpose.
download anywhere near the competition area.
Best regards,
Mark Allen
VA/DC Coaching Development Director
-----Original Message-----
From: Darlene Pantaleo <[log in to unmask]>
To: [log in to unmask]
Sent: Mon, 10 Nov 2008 4:40 pm
Subject: Re: [VADCFLL-L] attaching blocks
Three or more red/white citizens touching the pink grid area is worth 10 points. Three or more blue/gray leaders touching the tall, green mountain and/or city is worth 10 points. Three or more black/white scientists touching the research area is worth 10 points.
The answer is no according to the mission and the definition of touching. The LEGO people would no longer be touching the mat if they were attached to a brick.
Darlene Pantaleo
Judge Advisor
Maggie Walker
On Nov 10, 2008, at 3:52 PM, Freda Layne wrote:
Can kids attach a lego brick to the bottom of the people and still have them score
>>> Larry Sides <[log in to unmask]> 11/6/2008 8:18 PM >>>
I see nothing anywhere on the screen resembling in any way "complete
rotations before continuing." Can you tell me more exactly where to look?
Thanks.
Larry Sides
-----Original Message-----
From: First Lego League Discussion [mailto:[log in to unmask]] On
Behalf Of Kevin and Stephanie Burke
Sent: Thursday, November 06, 2008 7:04 PM
To: [log in to unmask]
Subject: Re: [VADCFLL-L] motor will not stop
Check to see if you have "complete rotations before contining" (or something
like that) selected bottom right of the control panel. If you are trying to
turn the arm say 180 degrees and it is getting stuck and has only turned
179 degrees, it will keep trying to turn and not finish the routine or go to
the next step. This can happen if the kids are starting the arm 1/2 up,
for example. De-select that option to keep this from happening.
----- Original Message -----
From: "Larry Sides" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, November 06, 2008 6:04 PM
Subject: [VADCFLL-L] motor will not stop
> Has anyone had a situation where the motor controlling the arm, never the
> motors turning the wheels, will begin to turn and not stop? The
> program/robot was running correctly, the way we wanted, and then for no
> obvious or apparent reasons began to take on a mind of its own. The
> command
> starts at the correct sequence in the program, but once the motor begins
> to
> turn, it does not stop.
>
> Thank you,
> Larry Sides
> Madison Menagerie Robotics
>
> ______________________________________________________________
> To UNSUBSCRIBE or CHANGE YOUR SETTINGS, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave
> the list".
>
> If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL
> administrative announcements will be distributed - visit
> https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or
> leave the list".
______________________________________________________________
To UNSUBSCRIBE or CHANGE YOUR SETTINGS, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave
the list".
If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL
administrative announcements will be distributed - visit
https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or
leave the list".
______________________________________________________________
To UNSUBSCRIBE or CHANGE YOUR SETTINGS, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL administrative announcements will be distributed - visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or leave the list".
This email may contain confidential material. If you were not an intended recipient, Please notify the sender and delete all copies. We may monitor all communications to and from our network. ______________________________________________________________ ______________________________________________________________ To UNSUBSCRIBE or CHANGE YOUR SUBSCRIPTION, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list". If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL administrative announcements will be distributed - visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or leave the list".
______________________________________________________________ ______________________________________________________________ To UNSUBSCRIBE or CHANGE YOUR SUBSCRIPTION, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list". If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL administrative announcements will be distributed - visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or leave the list".
______________________________________________________________
To UNSUBSCRIBE or CHANGE YOUR SETTINGS, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
If you want to join the VADCFLL-ADMIN-L mailing list - to which FLL administrative announcements will be distributed - visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html and select "Join or leave the list".
|
