Short answer is no. Long answer is see rule 39 bullet #1. http://www.firstlegoleague.org/sites/default/files/Challenge/FLL_WORLD_CLASS/FLL-WORLD-CLASS-Challenge-FINAL-v2.pdf 39 - Start/Restart Position - For the match start and all restarts: - EVERY BIT of the robot, including its installed attachments & wires, and everything touching it, and any objects it is about to move or use, must ALL fit COMPLETELY in Base. - The ROBOT may be touching objects it is about to move or use, but your HANDS may not. - The robot’s program may or may not already be running, but everything must be motionless. - If the robot is about to move a mission model from Base, you must be able to pick that model up and have NOTHING come with it (only do this if asked). - You may design/use a LEGO frame/“jig” to aim the robot, but its use must be completely in Base at all times, and you must let go of it prior to starting/restarting. You may not mark the mat nor use paper for aiming. (Reference Rules 14, 17,and 40.) On Tue, Nov 18, 2014 at 3:04 PM, Ralph Grove <[log in to unmask]> wrote: > Hello, > > We understand that Robot has to be completely within base boundaries > before starting the mission. > > Can any of the attachments (connected to the robot) be outside the > base-boundary lines if the attachment if NOT touching the board? > > Thanks! > > -- To UNSUBSCRIBE or CHANGE your settings, please visit > https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or > leave the list". > > -- VADCFLL administrative announcements are sent via > VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll- > ANNOUNCEMENTS-l.html to subscribe. > -- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list". -- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.