Rajeev,

Something to think about with the color sensor is the type of lighting at
the tournaments.   The first year our team was out, the students mastered
light sensor programming in my fluorescent lit classroom, but the
tournament was in a gym with halogen lighting and the light sensor programs
did not perform well.  The next year out the team decided to shield the
light sensors so the type of  lighting was not an issue and the team
performed well.

Claire

On Sun, Oct 6, 2019 at 8:08 PM Jeff Borek <[log in to unmask]> wrote:

> Rajeev,
> I'll share my 2-cents to add to what others have seen.  I've coached 4th
> and 5th graders for a number of years.  I have had a team get 2nd place in
> the robot game without using any sensors at competition (after
> briefly trying gyro and color sensor for line following).  I have had a
> team with great success using a color sensor for line detection and touch
> sensor for where to stop.  I would estimate maybe a little less than half
> of Division I teams make good use of a sensor.
>
> I really encourage teams to try to use a sensor (or other technique) to
> get precise movements. The default seems for the kids just to keep trying
> to add 0.1 rotation here or there or change where the robot starts in order
> to try to get it to end up where they want it to.  Of course if they learn
> that is not effective, then want to try something else better, that would
> be great, but I'll admit I really encourage them to do *something* other
> than just iterating.
>
> This year the sample Crane solution from First has a good simple
> proportional line follower using color sensor.  Given more time I think
> better to start them with 2-state (right if black, left if white) approach
> then move to proportional but this year just jumped in with that.
>
> For sensors in general, I think the touch sensor is the best place to
> start.  A program that says drive until the touch sensor hit is pretty
> simple.  And definitely remember you can add things to the touch sensor so
> it can detect a "touch" at more than just the one point.
>
> I think the conventional wisdom is the gyro and ultrasonic sensor are not
> reliable enough to be effective in competition, but I had a team do very
> well one year using the gyro (though had to be slow turns).  And of course
> they are still effective in learning!
>
> Hope that helps.
>
> Jeff
>
> On Sun, Oct 6, 2019 at 6:52 PM Rajeev Mehra <[log in to unmask]> wrote:
>
>> Greetings!
>> Coach of a rookie team here. I am wondering if other teams use the
>> sensors available in the kit?
>>
>> I see there are plenty of opportunities, like ultrasonic sensor to guide
>> the robot to a certain location away from something else, color sensor for
>> following the black lines on the mat, gyro sensor for accurate turns and
>> straight line driving.............BUT........do FLL teams actually use
>> them? Are they just too difficult to use and/or understand?
>>
>> I wonder if I should spend the time teaching the kids about these
>> "advanced options", or should I just let them figure it out themselves or
>> let them choose whether or not to use these fancy things.
>>
>>
>> Sincerely,
>>
>> Rajeev Mehra
>>
>> Coach: Ultimate Onions
>>
>> ------------------------------
>> To UNSUBSCRIBE or CHANGE your settings, please visit
>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>> leave the list".
>> VADCFLL administrative announcements are sent via
>> VADCFLL-ANNOUNCEMENTS-L. Visit
>> https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
>> subscribe.
>
> ------------------------------
> To UNSUBSCRIBE or CHANGE your settings, please visit
> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
> leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L.
> Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to
> subscribe.



-- 
*CLAIRE FORNSEL  *| Design Thinking & Computing
Lego Robotics Coach
Old Dominion University M.S. Education
Norfolk State University B.S. Chemistry
Suffolk County Community College A.A.S. Marine Technology

-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.