Print

Print


We use view in nearly every meeting and mission, we also use degrees in measuring distance, very accurate. 

Mike

On Sat, Oct 9, 2010 at 7:18 AM, Lloyd O'Hara <[log in to unmask]> wrote:
Cool idea, I like it and may borrow in the future.

----- Original Message ----- From: "Eric Palmer" <[log in to unmask]> Sent: Saturday, October 09, 2010 7:07 AM

Subject: Re: [VADCFLL-L] using sensors


Also our team constructs a measuring gauge with a wheel/tire the same
size of the one on your robot. They put one of those orange pointers
on an axle and use some beams to make a handle. They then just set it
down with the point in a know position and then push it and count
rotations.  360 degrees = 1 rotation.

This way they don't have to guess, program, download, run and rinse
repeat so often.

It saves time.

On Sat, Oct 9, 2010 at 6:30 AM, Lloyd O'Hara <[log in to unmask]> wrote:
Heather,

One thing for your team to lookout for is battry charge. When the battery
charge lowers, it may take more time (seconds) to travel the same amount of
distance as it did when the battery was fully charged. (see Curt's handrill
analogy in a recent email).

Our team generally uses degrees (1/360 of the circumference of the wheels
you are using). Degrees, as well as other sensors, can be easily measured
using the "View" function on the NXT.

Lloyd


----- Original Message ----- From: "Heather Houlden" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, October 08, 2010 10:05 PM
Subject: Re: [VADCFLL-L] using sensors


It is my first year as well, so we are learning too. However, my kids are
measuring the distances the robot needs to travel.
We programmed the robot to travel in a straight line for a set time (I
think it was 10 sec). Then they measured the distance travelled, and I
had them compute the seconds per inch travelled.

Then they just multiply the seconds/inch by the number of inches the
robot needs to move, so that they can program the number of seconds
to move.
So far it seems to be working OK for them. There may be an easier way
to do it, but this is what they came up with.
Hope this helps!
Heather
Team Blockbusters

-- To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave
the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L.
Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.


-- To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave
the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit
https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.


-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.


-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.



--
--
Michael Brown
Y!:nrune AOL:nrune
GPS: Team Virginia Brown's

To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.