The Animal Allies Field Setup does not say to attach the Biomimicry Wall to
the table side boundaries.

BIOMIMICRY WALL AND GREEN GECKO: The Biomimicry Wall’s feet are spaced
slightly wide. Center them as close to their marks as possible, and keep
them parallel. Press the Green Gecko onto its holder at the center of its
belly as shown.
So, I guess that you'll have to treat this as an engineering challenge, to
try to avoid the unwanted behavior.

Steve Scherr
Virginia-DC FLL Referee Advisor

On Sat, Sep 17, 2016 at 2:36 PM, Rick Fontanilla <[log in to unmask]>

> My team was testing to see if our robot can hang on the Biomimicry Wall.
> Each test we noticed the robot was causing the wall to fall toward the
> center of the table.  Are we suppose to secure the Biomimicry Wall to the
> table wall?
> In the past we had some missions pieces that were connected to the table
> wall.
> Thanks
> Rick

-- To UNSUBSCRIBE or CHANGE your settings, please visit and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit to subscribe.