Print

Print


My page references are a bit off in my email below. For the Field Setup
Guide, check pages 5 and 6 (not 8 and 9). Also, the Mission reference is on
page 21.
My computer started counting pages with #1 of 12 identified as #4:

[image: Inline image 1]

On Mon, Oct 30, 2017 at 4:22 PM, Robot Bill <[log in to unmask]> wrote:

> The target area is the black rectangle on the mat near the North Wall and
> the surface between that rectangle and the North Wall. Also, there is no
> asterisk associated with this mission, so HOW you do it does not matter as
> long as the *underlined* condition is visible at the END of the match and
> as long as your method is allowed by all of the Rules.
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__firstinspiresst01.blob.core.windows.net_fll_&d=DwIFaQ&c=eLbWYnpnzycBCgmb7vCI4uqNEB9RSjOdn_5nBEmmeq0&r=k6Oa5GxfBPFMgGjb2r5QIoEOeBZs9xbNIpA0kLw_kFQ&m=cUGggaAoc5P2xqH4Oq_0uK1yMPG4Xq-Pftlx_LghJfQ&s=IQ83IfJhrOoqIkse_oy_izjrwZt9LEkNJHBAPev7ZuY&e= 
> hydro-dynamics-challenge-guide-letter.pdf
>
> Page 24:
> [image: Inline image 4]
>
> Page 24:
> [image: Inline image 3]
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__firstinspiresst01.blob.core.windows.net_fll_&d=DwIFaQ&c=eLbWYnpnzycBCgmb7vCI4uqNEB9RSjOdn_5nBEmmeq0&r=k6Oa5GxfBPFMgGjb2r5QIoEOeBZs9xbNIpA0kLw_kFQ&m=cUGggaAoc5P2xqH4Oq_0uK1yMPG4Xq-Pftlx_LghJfQ&s=IQ83IfJhrOoqIkse_oy_izjrwZt9LEkNJHBAPev7ZuY&e= 
> hydro-dynamics-field-setup-letter.pdf
>
> Page 8:
> [image: Inline image 2]
>
> Page 9:
> [image: Inline image 1]
>
>
> On Mon, Oct 30, 2017 at 2:16 PM, Jennifer Scott <000000af6d98f8a4-dmarc-
> [log in to unmask]> wrote:
>
>> Thanks everyone!  We may consider this, even though it could take more
>> time.  It just seems that if it is brought back to base, the
>> robot/attachments could manipulate it from a better position and move it
>> right to target - without all the angle moves.
>>
>> The rules state that it must have contact with the mat, and inside the
>> target area.  It is still hard to determine if the target area is the
>> ‘black’ area OR if it is the “black area” and putting the addition directly
>> into the flow where the opening is.  Any final thoughts on that?
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Jennifer Scott, NCTM
>> Nationally Certified Teacher of Music
>> Jennifer Scott's Piano Studio
>> Website: www.jspianostudio.com
>> <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.jspianostudio.com&d=DwMFaQ&c=eLbWYnpnzycBCgmb7vCI4uqNEB9RSjOdn_5nBEmmeq0&r=k6Oa5GxfBPFMgGjb2r5QIoEOeBZs9xbNIpA0kLw_kFQ&m=c7XUYva_4_EMczsqHpkgCecaVTBQCLIjy8tDTXW6wkw&s=cTchOykqWhPNSNx3wcBunuoeqDPp7bYFcR-HwVMJhno&e=>
>>
>>
>> On Oct 30, 2017, at 2:06 PM, Chandra Shekhar Bhimaraju <
>> [log in to unmask]> wrote:
>>
>> I agree that there is nothing that states you can bring back pump
>> addition, however, I am not sure how you can get the FLOW mission back as
>> this is secured, I would recommend checking you mission building
>> instructions for FLOW.
>>
>> Regards
>> Chandra Bhimaraju
>> RoboRockers Coach.
>>
>> On Mon, Oct 30, 2017 at 1:51 PM, Sandy <0000006a2799aed8-dmarc-reques
>> [log in to unmask]> wrote:
>>
>>> I am with David. I see nothing in the rules that indicates that the pump
>>> addition can’t be brought back to base.
>>>
>>> Sent from my iPhone
>>>
>>> > On Oct 30, 2017, at 1:45 PM, David Y <[log in to unmask]> wrote:
>>> >
>>> > Hello Jenny,
>>> > I believe the pump addition (M03) has to start at the designated area,
>>> but I don't see why you can't bring it back to base and put it back if you
>>> choose to.  There's no rule that says you can't.  Of course that would take
>>> more time to bring it back to base and set it to target area.
>>> >
>>> > Best,
>>> > David
>>> >
>>> > -----Original Message-----
>>> > From: First Lego League in Virginia and DC [mailto:
>>> [log in to unmask]] On Behalf Of Jennifer Scott
>>> > Sent: Monday, October 30, 2017 12:55 PM
>>> > To: [log in to unmask]
>>> > Subject: [VADCFLL-L] Flow Addition
>>> >
>>> > Hi there!
>>> >
>>> > Our team is trying to figure out alternatives to tackling the flow
>>> addition.  Does it have to start out in the designated area next to the
>>> flow at the beginning (L shaped area)?  Or, can the team bring it to base
>>> with the robot, and then move it to its target area, in contact with the
>>> flow?
>>> >
>>> > Thanks, would love your thoughts and advice.
>>> > Jenny Scott
>>> > Co-Coach Fox BLOCSS
>>> >
>>> > -- To UNSUBSCRIBE or CHANGE your settings, please visit
>>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>>> leave the list".
>>> >
>>> > -- VADCFLL administrative announcements are sent via
>>> VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archi
>>> ves/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
>>> >
>>> > -- To UNSUBSCRIBE or CHANGE your settings, please visit
>>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>>> leave the list".
>>> >
>>> > -- VADCFLL administrative announcements are sent via
>>> VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archi
>>> ves/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
>>>
>>> -- To UNSUBSCRIBE or CHANGE your settings, please visit
>>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>>> leave the list".
>>>
>>> -- VADCFLL administrative announcements are sent via
>>> VADCFLL-ANNOUNCEMENTS-L.. Visit https://listserv.jmu.edu/archi
>>> ves/vadcfll-ANNOUNCEMENTS-l.html
>>> <https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l..html> to
>>> subscribe.
>>>
>>
>> ------------------------------
>> To UNSUBSCRIBE or CHANGE your settings, please visit
>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>> leave the list".
>> VADCFLL administrative announcements are sent via
>> VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archi
>> ves/vadcfll-announcements-l.html to subscribe.
>>
>> ------------------------------
>> To UNSUBSCRIBE or CHANGE your settings, please visit
>> https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or
>> leave the list".
>> VADCFLL administrative announcements are sent via
>> VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archi
>> ves/vadcfll-announcements-l.html to subscribe.
>
>
>

-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".

-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.