Our team started using AA batteries instead of the rechargeable battery pack.
But when they had to change the batteries, they had dismantle the robot to get
to the battery compartment. I am worried that the kids will not put back the
robot perfectly, if they have to do this just before the tournament to have
fresh batteries in. Is that how it is normally done?
thanks
Gaja
________________________________
From: Jerry Lorengo <[log in to unmask]>
To: [log in to unmask]
Sent: Fri, October 8, 2010 3:28:54 PM
Subject: Re: [VADCFLL-L] NXT batery warning
Agreed - always use fresh AAs.
The recharchable batter has a goofy memory and the voltage drop will make
reproducibility for missions almost impossible.
Sent from my iPhone
On Oct 8, 2010, at 12:48 PM, Lloyd O'Hara <[log in to unmask]> wrote:
We only use batteries and always make sure we have plenty on hand.
>
>Also, I'm sure why you would take 2 sets of four AA batteries, the nxt takes
>six AA..
>
>Lloyd
>----- Original Message -----
>>From: Viquar Shaikh
>>To: [log in to unmask]
>>Sent: Friday, October 08, 2010 10:50 AM
>>Subject: Re: [VADCFLL-L] NXT batery warning
>>
>>
>>To add to this --- no matter what - we always carry 2 sets of four AA
>>batteries - one is a new packed set. This is a good backup for these
>>'just-in-case' scenarios.
>>
>>Thanks
>>Viquar
>>
>>
>>On Fri, Oct 8, 2010 at 10:32 AM, Brandy bergenstock <[log in to unmask]>
>>wrote:
>>
>>This came across the Ga FLL yahoo group adn I thought it was important for
>>everyone to realize:
>>>
>>>The other day my team had taken one of their NXT bricks with them to a
>>>meeting. When we got home, the battery was completely discharged. After
>>>recharging it, my daughter discovered that the "Sleep" setting was at 60
>>>minutes. The brick had accidentally turned on during transport and since
>>>the sleep setting was so long, it ran the battery down. We discovered that
>>>the 60 minute setting is the default for both the 1.26 and 1.31 firmware
>>>update. That is WAY too long!
>>>
>>>If you have updated your firmware, you should check the sleep setting and
>>>change it is a more reasonable time (perhaps in the 2-5 minute time
>>>frame). This way you won't accidentally run down your battery. I'd hate for
>>>someone to discover their battery was dead when they arrived at a
>>>competition.
>>>
>>>To access the sleep setting on the NXT brick, go to:
>>>
>>>Settings
>>>Sleep
>>>and then change the time with the arrow buttons
>>>
>>>
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave
the list".
>>>VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit
>>>https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.
>>>
>>
>>________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the
list".
>>VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit
>>https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.
>>
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the
list".
VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit
https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.
________________________________
To UNSUBSCRIBE or CHANGE your settings, please visit
https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the
list".
VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit
https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.
-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
-- VADCFLL administrative announcements are sent via VADCFLL-ADMIN-L. Visit https://listserv.jmu.edu/archives/vadcfll-admin-l.html to subscribe.
|