I should also have said (between #1 and #2) that anything touching the mat on the "C" side would cause the behavior as well.
And, that I believe that a defective "C" motor is unlikely - only mentioned because it is possible.
What does your drive train look like (simple wheels, simple treads, or a complex mechanism) and what contact with the mat is there besides the drive mechanism.
One year the team didn't do a good job of setting the height of attachments (or initial placement), so they dragged a lot, but with no constancy. As a result, they never knew which way the robot would go because the controller frequently couldn't compensate (and they had a pretty simple drive mechanism) - they ran into alot of stuff and subsequently didn't score well.
Brian
Sent from my iPhone
On Nov 1, 2013, at 9:37 AM, Rahman Rasulzada <[log in to unmask]> wrote:
> <Presentation1.jpg>
> Here is the what we are having problem
>
>
> On Fri, Nov 1, 2013 at 8:30 AM, Rahman Rasulzada <[log in to unmask]> wrote:
>> Hello folks ,
>>
>> We are having a trouble with new Ev3 large motors. Robot wheels not going straight however they put same values (rotation or degrees) but robot degree values change automatically... My students reset , and updated firmware but still having same issue. Motor values keep change ........
>>
>> Any suggestion ? Really appreciated
>>
>>
>> --
>> _________________________
>> best regard,
>>
>> Rahman Rasulzada
>> Pinnacle Academy ,
>> IT Manager & Computer Teacher
>> School Website
>> Personal Website
>> Computer Classroom Website
>
>
>
> --
> _________________________
> best regard,
>
> Rahman Rasulzada
> Pinnacle Academy ,
> IT Manager & Computer Teacher
> School Website
> Personal Website
> Computer Classroom Website
>
> To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
> VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-announcements-l.html to subscribe.
-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
|