Subject: | |
From: | |
Reply To: | |
Date: | Fri, 18 Oct 2019 20:59:32 -0400 |
Content-Type: | multipart/alternative |
Parts/Attachments: |
|
|
Q: When does a Team lose the precision points?
A: The Referee removes a Precision Token from the field when the Team
Interrupts the Robot and the Robot is not completely in Home.
The Team may continue to handle the Robot until the next Launch without
worrying. (The Team can't Interrupt the Robot until there's another
Launch.)
Rule 27 (also see RG07): INTERRUPTION PROCEDURE – If you Interrupt the
Robot, stop it instantly, then calmly pick it up for the next Launch.
Where was the Robot Interrupted? Not Completely in Home: Lose a Precision
Token.
Rule 09: INTERRUPTION – The next time you interact with the Robot after
Launch.
Steve Scherr
Virginia-DC FLL Referee Advisor
On Thu, Oct 17, 2019 at 12:18 PM Shanti <
[log in to unmask]> wrote:
> In addition to these questions, I would like an answer for the following:
>
> When does someone lose the precision points? I have a scenario.
>
> Robot starts first mission form launch area at 0:00 mins...gets its done
> and returns to home area after 1 minute.
>
> Then the technicians touch it and change the attachments and again could
> do 2 things before start of second mission (by this time 1:10 minutes have
> passed)
> A) Start from home
> B) Pick the Robot from home and place it in Launch area
>
> Do they lose precision point in A) or B) or Both situations because they
> touched it after the initial First mission launch
>
>
-- To UNSUBSCRIBE or CHANGE your settings, please visit https://listserv.jmu.edu/archives/vadcfll-l.html and select "Join or leave the list".
-- VADCFLL administrative announcements are sent via VADCFLL-ANNOUNCEMENTS-L. Visit https://listserv.jmu.edu/archives/vadcfll-ANNOUNCEMENTS-l.html to subscribe.
|
|
|